Skip to content
Tags

,

Jay Kay Technology Conference – Commscope

May 9, 2015

Commscope

These are my notes from the various sessions as part of the 2015 Jay Kay Technology Conference. – Todd

http://www.commscope.com/Product-Catalog/Enterprise/Brand/Redwood–Intelligent-Lighting-Network-Solutions/Redwood-/

Commscope
Jay Hollerin

Redwood Lighting

Sensor network that connects over IP, monitor occupancy, air quality, light, temperature, etc. LED fixture connected via standard RJ-45 connector. Switch connected with same type of connector, use Cat 5E or Cat 6 cabling. Cabling is much easier this way. Can use a standard POE switch. Software is server based to control all of the functions, etc.

Quite a bit of conversation around lighting and Jay had a demo setup of some hardware to work with.

One sensor in each room, but multiple fixtures, however the fixtures are tied to the sensor. Wall panel switch is also IP connected.

All the power for the lighting comes from the POE switch. All cabling would go back to the switch rooms. Need to learn a little more about to see how it works.

Advertisements

From → ATLE, GHSD

Leave a Comment

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: